In addition to affecting the beauty of the wooden door, mold growth may also cause other respiratory diseases such as asthma. Therefore, when you find that the solid wood door in your home is moldy, you can use a dry paper towel to remove the mold, or use a brush for a few strokes and then wipe it off with a paper towel. If the mold has not been removed, wipe it vigorously with a damp paper towel or towel.

Special essential oils also have a better function of removing mildew. You can first use a clean soft cloth coated with a special cleaning agent to remove mildew. Then apply a layer of door wax or special essential oil to the moldy spots, and put a bar of soap in the moldy place, or it can be dried tea dregs, to eliminate the moldy smell.

The reason for the mildew of the wooden door may also be the low number of paints and poor paint quality. Therefore, use petroleum jelly as a protection to clean the mold with a rag, and then wipe it with a clean cloth. After removing the mildew, dry the wooden door.

Ways to deal with moldy wooden doors in daily life

1. Quicklime

Solid wood doors are more susceptible to moisture, and the wood simply swells and becomes moldy when wet. You can put quicklime powder in the gap between doors, windows and the ground! In addition, the door should be waxed regularly, and every 6-12 months, use a special door cream wax to wax the door. Before waxing, use milder, non-alkaline soapy water to wipe off the old wax.

2. Vaseline

You can apply petroleum jelly with a rag to clean it, and then wipe it with a clean cloth. Find a small box at home and put lime on it. On the wooden door, install a 5-8 watt tungsten light bulb, turn it on at night or during humid periods, to keep the humidity in the space below 30%.

3. Cleaner

In the humid spring and summer days when there are more thunderstorms, the solid wood door can be cleaned with a soft cloth dipped in a special door cleaning agent to quietly wipe off the dust. This type of cleaning agent can form a protective film on the surface of the solid wood door. , To a certain extent, hinder the penetration of water vapor into the interior of the wooden door.

4. Special essential oils

If you encounter serious mildew on the solid wood door, first use a clean soft cloth dipped in a neutral cleaning agent or a special door cleaning agent to remove it. Then quietly smear a layer of door wax or door-specific essential oil on the moldy areas, and place a piece of soap or a gauze bag full of dried tea residues in the musty area to help eliminate the musty smell.

Daily maintenance can not be ignored:

1. You can put quicklime powder in the gap between the door and the ground. In addition, the door should be waxed regularly. Every 6-12 months, use a special door cream wax to wax the door. Before waxing, use milder, non-alkaline soapy water to wipe off the old wax.

2. In the wet spring and summer with thunderstorms, try not to clean it directly with a rag with water. When cleaning the solid wood door, you can wipe it with a clean soft cloth or lightly wipe it with a special cleaning agent for the wooden door. Wipe to remove dust and dirt. This type of cleaning agent can form a protective film on the outer surface of the solid wood door, which must prevent water vapor from penetrating into the interior of the wooden door to a certain extent. Door Industry Vision, your friend! In the boring seasons such as autumn and winter, use a slightly damp soft cloth to quietly scrub along the lines of the wood, and maintain the water content of the solid wood door to prevent cracking. Pay attention not to wipe with a dry cloth, avoid wiping flowers.

3. If you encounter mildew on the solid wood door, first use a clean soft cloth dipped in a neutral detergent or a special door cleaner to remove it. Then quietly smear a layer of door wax or door-specific essential oil on the moldy areas, and place a piece of soap or a gauze bag full of dried tea residues in the musty area to help eliminate the musty smell.

4. You can put some dehumidification products such as moisture absorption boxes, activated carbon, etc. beside the door, and properly open the windows or use the air conditioning function to exhaust the humid air in the house. In addition, indoor plants can be placed on the balcony or living room, not near the door, so as to avoid water leakage during watering, causing foaming on the ground such as wooden floors, causing the solid wood door to fail to close.

Yichang Wuxing Material Technology Co., Ltd. was established in 2002 and is located in Chengbei Industrial Park, Yuan'an County, Hubei Province, with convenient transportation and beautiful environment. The company occupies an area of ​​more than 80,000 square meters, has 3 hot pressing lines and 4 impregnation lines, with an annual output of more than 3.5 million sheets. It produces fireproof panels, PCB phenolic panels, metal panels, curved panels, wall panels, and antibacterial panels. , CPL is a professional manufacturer of new thin sheets and expanded fireproof boards. It is the first national high-tech enterprise in the country to develop and produce Le Si Fu antibacterial household products.